Installation Instructions: Trellis with Anchor

Step 1

Position the trellis in the desired place.

Step 2

Insert anchors

Insert the anchors in the holes provided in the trellis and hammer them into the ground until they protrude approx. 5 cm from the ground. Then fine-tune with the following materials:

• 1 piece nut M8
• 1 piece washers M8

Step 3

Screw trellis with anchors

After final fine adjustment of the height of the trellis, the anchor is screwed in place with the following materials in each case:

• 1 piece nut M8
• 1 piece washers M8

 

Installation Instructions PDF

Do you have any questions or would you like more information?

Portrait photo Internal Sales Representative Jana Klammt

Jana Klammt
export department

Installation Instruction for Trellis with Anchor

©2024 HYDROTEC Technologies AG

Settings saved
Privacy settings

Manhole covers & Gully tops

Drainage Channels

Surface Boxes

Gardening & Landscaping